Frigidaire Ovens & ranges error code
Shorted temperature-probe circuit
The control has detected a short in the oven temperature-probe circuit.
Direct answer
F31 at a glance
- Meaning
- Shorted temperature-probe circuit
- Urgency
- Service recommended
- First safe check
- Turn the oven off.
- Model note
- Confirm the code and access instructions in the manual for your exact model.
Likely causes
Why F31 appears
- 01Temperature probe is shorted
- 02Probe wiring fault
- 03Control fault
Safe diagnostic path
What to check, in order
- 01
Turn the oven off.
- 02
Disconnect power for 30 seconds.
- 03
Restore power once the oven is cool.
- 04
Arrange service if F31 returns.
Know when to stop
Don’t push past this point
Do not use the oven if temperature control is unreliable.
Primary source
How this page was checked
The code meaning and manufacturer-specific guidance were checked against the linked support material on August 28, 2026. Confirm details against the manual for your exact model before removing panels or parts.
Read Frigidaire: oven error-code guide ↗Common follow-up questions
About Frigidaire code F31
What does F31 mean on a Frigidaire ovens & ranges?
F31 means “Shorted temperature-probe circuit.” The control has detected a short in the oven temperature-probe circuit.
Can I clear F31 by resetting the appliance?
A reset may clear a temporary alert, but it does not correct the underlying condition. Start with the safe checks above and stop if the code returns. Do not use the oven if temperature control is unreliable.
Does F31 mean the same thing on every Frigidaire model?
Not necessarily. Display codes can vary by model and product family, so confirm the meaning and access instructions in the manual for your exact model before removing covers or parts.
When should I stop troubleshooting F31?
Do not use the oven if temperature control is unreliable.