Faultwise code library
Ovens & ranges
error codes
5 manufacturer-sourced guides from 1 brand, organized around the code on your display rather than vague symptoms.
All verified guides
Find your displayed code
If the exact code is not listed, use the model manual rather than assuming a similarly named code means the same thing.
| Code | What it means | Urgency | First safe check |
|---|---|---|---|
| F10 | Thermal runaway or unusually high temperatureThe range is detecting higher-than-normal oven temperatures. Frigidaire treats F10 as a built-in safety alert. | Stop using | Turn the oven off. |
| F1 | Shorted keypadFrigidaire lists F1 as a keypad fault on supported ranges. | Service recommended | Turn the range off. |
| F30 | Open temperature-probe circuitThe oven control is not receiving the expected temperature-probe signal. | Service recommended | Turn the oven off. |
| F31 | Shorted temperature-probe circuitThe control has detected a short in the oven temperature-probe circuit. | Service recommended | Turn the oven off. |
| F90Also F91, F92, F93, F94 | Oven door-lock issueThe range has detected a problem with the oven door-lock system. Related models may show F91 through F94. | Pause and inspect | Turn the oven off and allow it to cool completely. |
F10Frigidaire Ovens & rangesThermal runaway or unusually high temperatureThe range is detecting higher-than-normal oven temperatures. Frigidaire treats F10 as a built-in safety alert.Stop usingF1Frigidaire Ovens & rangesShorted keypadFrigidaire lists F1 as a keypad fault on supported ranges.Service recommendedF30Frigidaire Ovens & rangesOpen temperature-probe circuitThe oven control is not receiving the expected temperature-probe signal.Service recommendedF31Frigidaire Ovens & rangesShorted temperature-probe circuitThe control has detected a short in the oven temperature-probe circuit.Service recommendedF90Frigidaire Ovens & rangesOven door-lock issueThe range has detected a problem with the oven door-lock system. Related models may show F91 through F94.Pause and inspect