LG Washing machines error code
Water inlet error
The washer is not receiving enough water. Closed taps, kinked inlet hoses, and restricted inlet filters are common causes.
Direct answer
IE at a glance
- Meaning
- Water inlet error
- Urgency
- Check now
- First safe check
- Confirm both supply taps are fully open.
- Model note
- Confirm the code and access instructions in the manual for your exact model.
Likely causes
Why IE appears
- 01Supply taps are not fully open
- 02Inlet hose is kinked or pinched
- 03Inlet filter is restricted
Safe diagnostic path
What to check, in order
- 01
Confirm both supply taps are fully open.
- 02
Straighten the hot and cold inlet hoses.
- 03
Check that the correct hose is connected to each inlet.
- 04
Clean inlet screens only as directed in the model manual, then retry.
Know when to stop
Don’t push past this point
Turn off the supply valves and request service if water continues entering when the washer is off or a leak appears.
Primary source
How this page was checked
The code meaning and manufacturer-specific guidance were checked against the linked support material on August 28, 2026. Confirm details against the manual for your exact model before removing panels or parts.
Read LG USA: washer error-code list ↗Common follow-up questions
About LG code IE
What does IE mean on a LG washing machines?
IE means “Water inlet error.” The washer is not receiving enough water. Closed taps, kinked inlet hoses, and restricted inlet filters are common causes.
Can I clear IE by resetting the appliance?
A reset may clear a temporary alert, but it does not correct the underlying condition. Start with the safe checks above and stop if the code returns. Turn off the supply valves and request service if water continues entering when the washer is off or a leak appears.
Does IE mean the same thing on every LG model?
Not necessarily. Display codes can vary by model and product family, so confirm the meaning and access instructions in the manual for your exact model before removing covers or parts.
When should I stop troubleshooting IE?
Turn off the supply valves and request service if water continues entering when the washer is off or a leak appears.